What do you think when you see a trampoline in your backyard? Fun right? This article will teach you how to take apart a trampoline with step-by-step instructions. You can enjoy the summer days and nights without the worry of having to disassemble it on your own.
Why Do You Need To Disassemble A Trampoline?
A trampoline is a fun toy, but there are some precautions that you should take when using it. It doesn’t matter if the trampoline isn’t in use or not; metal springs can rust and will eventually snap. The fabric on top of the mat could tear from wear and weather exposure.
You need to disassemble a trampoline to remove any rust, replace the fabric and tighten or change out the springs. The trampoline material is UV resistant, which means it can withstand normal sunlight and other weather conditions, but the extremely bad climate affects the material and will eventually cause it to tear.
You can’t just remove the mat from a trampoline, because you’ll end up damaging it more than if you left it alone. You need to use caution when removing the springs so they don’t snap back on your hands or hit other parts of your body.
So this is the time you have to disassemble your trampoline.
Steps on How To Disassemble A Trampoline
Remove Trampoline Net, Poles, And Other Accessories
The first step in the process of disassembling a trampoline is to remove the net, poles, and other accessories. You should also remove any additional items to make sure that you don’t damage them during the dismantling process.
Here is a list of items to remove: The net and poles are usually attached by metal rings, which can be unscrewed or untied. There may also be rope ties that need to be cut with scissors.
Once the ropes have been removed, you should remove any screws on the poles if they were used for assembly purposes. In some cases, there may be a strap that needs to be removed with pliers when the pole is too large for your hands.
If you have any other items attached such as sandbags or weights, now would also be a good time to remove them and store them somewhere else so they don’t get damaged during the disassembly process.
Once all of these items have been removed, you should set them aside in a safe place.
Also Read: Top-Notch Rebounders Reviewed
Remove the Safety Pad or Spring Cover
The next step in the process is to remove any safety pads or spring cover. Keep these parts safe so you can use them again later on if needed. You’ll need to unscrew all of the nuts and bolts that were used for assembly purposes, which will release a metal frame from around the padding material.
The best way to do this is to use a screwdriver for leverage. You’ll need to remove the padding material from the frame, which should be easy if it was screwed down during the assembly process.
You can get rid of any plastic parts that are still attached and place them in a safe location so they won’t damage anything else while you’re dismantling your trampoline.
This is the step where you’ll need to be most careful. The springs attached on either side of the mat are under a lot of tension and could snap back if they aren’t handled properly.
You should never remove any part without first taking precautionary measures such as wearing gloves or using something like wire cutters that will avoid injury from being sprung.
You’ll need to unscrew the bolts that are holding down the springs so they won’t take off your hands or other body parts while you’re working with them.
This can be tricky because of how much tension there is in those springs, but it’s not impossible if you have a good screwdriver and some patience. You should make sure to use the screwdriver for leverage and not your hands.
Once you’ve unscrewed all of the bolts, it’ll be time to remove them from their holders. This can be done by using your fingers or if they’re too tight, you may need a different tool like pliers to assist with removal.
Once all of this is done, you should cover it with a blanket or something like that and leave it alone for a while so as to not get injured while gathering up the rest of your materials.
Remove the Springs
The next step is to remove the springs. You’ll need to cut the ropes that are holding each spring in place with a sharp pair of scissors or wire cutters, being careful not to slice through any fingers while doing so.
You should then pull on both ends of the rope until it’s detached from its anchor point and completely removed. You may need to move the trampoline around so you can get better access to these ropes depending on what kind of model it is.
Once all of this has been done, you should place those springs in a safe area away from anything that could hurt them while they’re under tension, such as your fingers. It’s also important not to leave them out in the sun too long because they could get warped and ruined.
Once all of this is done, you should place those springs in a safe area away from anything that could hurt them while they’re under tension, such as your fingers. It’s also important not to leave them out in the sun too long because they could get warped and ruined.
If you have a smaller trampoline that doesn’t have springs, then this step will be skipped entirely. Just take care of the other items mentioned in this article like removing any padding or securing it with rope so it won’t fly all around your yard when taken apart.
Fold the Jumping Mat
The next step is to fold the mat so it’s easier to store. You’ll need to push down on each side of the jumping mat with your feet and pull it towards you until it pops into place at a 90-degree angle, then leave that way for now.
You can use just one hand or both hands if needed because it won’t take much force to do so. You’ll then need to pull the mat towards you again and push it down until it folds into a triangle shape, which is called an accordion fold.
You can use your hands or kick at them with your feet if needed for more leverage in order to get that nice even bend on each side. Fold the mat again in the same way as before to create a square shape, which you can then place on top of your other folded parts.
You’ll now need to do all this for every folding part until everything is nicely organized and doesn’t take up too much space while being stored away. When finished, cover it with something like a blanket or tarp so it doesn’t get damaged while you’re working on the rest of your project.
Dismantle the Frame
The next step is to remove the frame. You’ll need a heavy object, like a block of wood or two large pieces of cardboard, and place it on top of one side at an angle where you’ll be able to push down on it securely so that it’s flush against the ground while lying parallel with the trampoline.
You’ll then need to do the same with another heavy object on the other side so that it’s also flush against the ground. You’ll now want to flip your trampoline upside down and place a few pieces of wood or cardboard underneath each corner where there are gaps in order for them not to be left open while being stored away, especially if it’s a heavy model.
You should first flip the jumping mat over and place it in an accordion fold, then do this with each one of your other folded parts until everything is neatly organized to make things easier when you’re done taking apart all the pieces.
Also Read: Amazing & Affordable Heavy Duty Trampolines
Store All At Safe & Dry Place
At this point, you should have all your parts neatly stored away in a safe area with no chance of them getting damaged. You’ll need to cover it for protection from the sun and other items like pets or small children who may be tempted to play on it.
This is something that can easily happen if left uncovered because of its size so be sure to take care of this step before you’re done. This is the last part and it’s where you’ll need to store all your dismantled tramps in a safe location so that they don’t get damaged by harmful elements or people who are not allowed near them while being stored away.
The easiest way we recommend doing this is with heavy-duty plastic tarps that you can find at any hardware store. You’ll want to place the tarp in a square shape on the floor, then fold it up so only one corner is showing, and use that as your starting point for folding over all of your tramps into each other until they’re nicely wrapped together with no chance of them getting damaged or knocked over by anyone.
Once you have it all wrapped up, then just tie it off so the ends are tight and place it in a dry location where they won’t get wet from rain or any other elements that can cause problems with your tramps while being stored away.
How To Get Rid Of Rusting In Trampoline While Disassembling
Rusting is a very common problem for trampolines when they’re left outside and not taken care of, which is why you’ll want to get rid of it before it starts causing problems.
You can start by spraying the rusty parts with WD-40 so that any loose rust will be removed, then apply some white vinegar mixed with water onto the rust. You’ll want to leave it on for about 30 minutes, then rinse off the area before you dry it with a soft cloth so that any remaining residue is gone and won’t cause problems down the line.
It’s also important to use rust remover in areas where there are larger amounts of rusting or corrosion taking place because this will not only remove the rust but protect the area from any further damage.
You can then spray off these areas with WD-40 to prevent them from getting worse so that you don’t need to use as much of your rust remover in order for it to be effective.
If all this doesn’t work or if there are too many rusting areas, then you’ll need to replace the part in order for it to be safe again and not a hazard. The first step is scraping off any loose rust from your trampoline with an old metal putty knife or some other tool that can scrape corrosion away without damaging the surface of the frame.
You want to do this to any areas with rusting because it will either be able to remove the corrosion or prevent further damage that may happen.
The next thing you’ll want to do is use a wire brush on your trampoline in order for all of the loose rust and corrosion to come off before sealing it up so that there isn’t anything left behind.
You can either use a wire brush attachment on your drill, or you can use an abrasive pad with some paint thinner in order for everything to come off and leave the surface of the trampoline clean.
Finally, use a compressor to blow out any of the larger holes where there’s corrosion because this will help keep them from getting worse and spreading while also stabilizing your trampoline.
Also Read: Measuring Trampolines Guide
Jeffery Ryan never believed in giving up. For over 10 years, he’s devoted his time to the sport of jumping and it has paid off tremendously for him with two medals. He has used quite a lot in his own trampoline jumping experience, which adds him in the perfect position to guide others and give his own accurate knowledge about trampolines. He keeps testing and researching new innovative ideas and techniques on trampolines in his own backyard. On weekends he can be found fishing and greeting different trampoline jumpers and attending conferences on the latest and well-known trampolines.